LEE CLASSIC Standard Filter Holder System
System Quick Links	Holders & Hoods	Starter Kits	Adapter Rings	LEE Polarisers	Filter Storage & Accessories	LEE Filters

LEE Holders & Hoods

Foundation Kit

The basic filter holder attaches to the camera via an adaptor ring.

Suitable for up to 3 filters

£52.00

Upgrade Kit

Contains a filter holder and tandem adaptor and converts your foundation holder into a professional kit

UPK

£67.00

Professional Kit

Contains two filter holders and a tandem adapter to join them together, allowing independent rotation of grads. You can also therefore use more than four filters.

£101.00

Tandem Adapter

Joins 2 filter holders or a hood to a filter holder

£18.00

PLEASE NOTE: Filter Holders are also available with integrated Lens Hoods - see Lens hoods

LEE Specialist Holders

100mm Push on Holder

Designed to fit straight onto certain wide angle large format lenses.

Takes 100mm filters and fits directly on lenses with an outside diameter of 100mm (filter thread often 95mm). Can be adapted to fit lenses or centre filter of smaller diameter.

FK100

£103.00

100-90 Donut Spacer

Adapts 100mm push on holder to fit around 86mm Centre Filters or lenses with 90mm diameter barrels

FK100D

£32.00

115mm Push on Holder

To fit lenses with 115mm diameter barrels such as Schneider IVa and IVb centre filters

FK115

£145.00

115-100 Donut Spacer

To adapt the 115mm push on holder to fit Centre Filters or lenses with 110mm diameter barrels

FK115D

£65.00

Wings

Extender plates to allow Lee 130x130 or 130x170mm [Cokin X Pro size] filters to be used on a Foundation Kit/100mm Push on Holder/115mm Push on Holder in situations where standard 100mm width filters are in danger of causing vignetting

FKW

£11.00

LEE Lens Hoods - Self Supporting and Flexible

Lens Hoods with Integrated Filter Holder

Universal Lens Hood - Integrated Filter Holder

Requires adapter ring .This Hood will accept the 105mm Polarising Ring

Has slots for 2 Filters

LHU

£116.00

Wide Angle Hood - Integrated Filter Holder

Requires adapter ring .This Hood will accept the 105mm Polarising Ring

One Filter Slot

LHWAFK

£174.00

Lens Hoods - Detachable from Foundation Kit / Filter Holder

Standard Hood / System Hood

With a 2mm rails to fit Filter Holder

LHS

£84.00

Wide Angle Lens Hood

With a 2mm rails to fit Filter Holder . Accept the 105mm Polarising Ring

LHWA

£174.00

Lens Hoods - 100mm Push on HWA Lens Hood

Designed to fit lenses with 100mm diameter barrel. Can also be used with the 100-90 Donut spacer to fit lenses/centre filters with 90mm diameter.

LHSP

£169.00

LEE Starter Kits

Starter Kit

Includes:Filter holder (already assembled) 0.6ND hard grad (100x150mm)

Coral 3 hard grad (100x150mm) Cleaning cloth & Pouch

£135.00

DSLR Starter Kit

Includes:Filter holder (already assembled) 0.6ND hard grad (100x150mm)

Pro Glass 0.6 ND (100x150mm) Cleaning cloth & Pouch

SKD

£193.00

LEE ADAPTER RINGS
Adapter Ring Standard 49, 52, 55, 58, 62, 67, 72, 77mm	AR	£17.50
Adapter Ring Standard 82mm & 86mm	AR8286	£37.50
Adapter Ring Standard 93, 95, 105mm	AR93	£53.50
Hasselblad Bay. 50, 60, 70 Rollie IV	ARBAY	£37.50
Adapter Rings Wide Angle 49, 52, 55, 58, 62, 67, 72, 77	ARW	£34.50
Adapter Rings Wide Angle 82mm	ARW82	£39.00
Lens Cap ( pack of 3) Keep your adapter on your lens and use these caps. Made of white polypropylene and while attached can be used to white balance a digital SLR, or as a makeshift incident light meter on any camera. They can also be written on to identify lenses whilst in the camera bag.	LC	£3.00

LEE Polarisers
LEE 105mm Polariser Ring Fits to the front of the filter holder or suitable Lens Hood and provides a 105mm thread to screw the 105mm Polariser to.	POL105	£30.00
LEE 105mm Glass Rotating Polariser - Circular This polariser is attached to the filter system via a 105mm Accessory Ring which fits to the front of the filter holder. This allows the polariser to be rotated independently of any other filters in the holder. It is the ideal solution for landscape photography, where the combination of graduated filters and polariser maybe required.	LEEPOL105C	£202.00
LEE 105mm Glass Rotating Polariser - Linear This polariser is attached to the filter system via a 105mm Accessory Ring which fits to the front of the filter holder. This allows the polariser to be rotated independently of any other filters in the holder. It is the ideal solution for landscape photography, where the combination of graduated filters and polariser maybe required.	LEEPOL105L	£127.00
LEE 100 x 100mm Square Glass Linear Polariser for System holder This polariser slots into the filter holder, which is then rotated to achieve the desired effect. This version is recommended for studio use, or when no other filters are required in addition to the polariser.	POL100L	£120.00
LEE 100 x 100mm Square Glass Circular Polariser for System holder This polariser slots into the filter holder, which is then rotated to achieve the desired effect. This version is recommended for studio use, or when no other filters are required in addition to the polariser.	POL100C	£136.00

LEE Filter Storage & Accessories
LEE Filter Wrap Microfibre cloth wrap with pockets to take up to 3 100x150mm resin filters.	FW	£4.50
LEE Multi Filter Pouch - Padded Book Style Holds up to 10 100 x 150mm resin filters	PMF	£31.00
LEE Filter Triple Pouch Holds up to 3 100 x 150mm resin filters	PTP	£22.00
LEE Filter Cleaning Solution 60ml	FCS	£3.00
LEE Filter / Lens Cleaning Cloth - Microfibre - washable 30cm	LCC	£4.00

LEE FILTERS
Quick Links	All Neutral Density	Grad Sets	Blues	Colour /Grads & Stripes	Black & White	CC/FL /CTC	Glass Enhancer

Inspiring Professionals - The Landscape Photographers’ Guide To Using Filters

Eight leading landscape photographers have joined forces with LEE Filters, to produce “Inspiring Professionals”, a book in which top professionals pass on techniques and advice on using filtration in landscape photography.

£10.00

Chasing the Light DVD

Chasing the Light is an inspirational and educational DVD exploring the essentials of landscape photography. Acclaimed international photographer David Noton examines the development of a photographic vision with practical hands on demonstrations, tuition, insights and examples at a number of inspiring locations and dramatic settings from a misty dawn at Glastonbury to the cliffs of Lands End and the autumnal glens of the New Forest.

£17.00

LEE NEUTRAL DENSITY FILTERS

LEE BIG STOPPER

The BIG Stopper is a high quality glass 10 stop long exposure filter. It reduces the amount of light entering your lens by 10 stops allowing you to use a much slower shutter speed or wider lens aperture.

Click on image right for more information

NOT IN STOCK - WAITING LIST 10 weeks.

£84.00

LEE 100 x 150 mm Neutral Density Graduated Filter Set of 3

0.3 , 0.6 & 0.9 Hard or Soft Edge - Please specify

NDGset

£168.00

LEE 100 x 150mm Individual Neutral Density Grads

0.3 , 0.45 , 0.6 , 0.75 & 0.9 Hard or Soft Edge Please specify

NDG

£67.00

LEE 100 x 150mm Individual Neutral Density Grad 1.2

NDG12

£101.00

LEE 100 x 100mm Individual Neutral Density Filters

0.3 , 0.45 , 0.6 , 0.75 & 0.9

£74.00

LEE 100 x 100mm Individual Neutral Density Filter 1.2

ND12

£112.00

LEE 100 x 100mm PRO GLASS ND

Available 0.6 or 0.9

The ProGlass ND is optimised for use with digital cameras, but equally useful for film. This brand new filter uses a surface coating made from evaporated metal, and therfore provides very even absorption across the visible spectrum and through the UV and Infra Red regions.

Digital SLR users need to use ND standard filters to prolong exposure times in bright conditions for landscape photography, but the excess UV and IR can cause colour problems in some lighting situations.

The ProGlass filter reduces any chance of false colour casts, and also provides a result described as ‘punchier’ on digital and film because the light forming the image is more specific to the requirements of the film or sensor.

NDPG

£110.00

LEE Resin Graduated Filter Sets - Soft Grads are supplied as standard in sets.

Sky Grad Set - Sunset 2 Grad, Sky Blue 3 Grad and Coral Stripe		£93.00
Sunrise Grad Set - Mahogany 1 Grad, Straw 2 Grad and Straw Stripe		£93.00
Landscape Grad Set - Real Blue 2 Grad, Sepia 2 Grad and Straw 3 Grad		£93.00
Sunset Grad Set - Sunset Red Grad, Sunset Orange Grad and Sunset Yellow Grad		£93.00
Twilight Grad Set - Twilight Grad, Mahogany 3 Grad and Pale Coral Stripe		£93.00
Colour Grad Set - Yellow Grad, Magenta Grad and Cyan Grad		£93.00
Mist Set - Mist Grad, Mist Stripe and Mist Clear Spot		£93.00
Pop Grad Set - Pop Blue, Pop Green and Pop Red Grads		£93.00
Autumn Tint Grad Set - Chocolate 2 Grad, Tobacco 2 Grad and Coral 6 Grad		£93.00
Coral Grad Set - Coral 2, Coral 4 and Coral 6 Grads		£93.00
Pale Tint Grad Set - Pink 1, Cyan 1 and Green 1 Grads		£93.00
Sky Blue Grad Set - Sky Blue 1, Sky Blue 2, and Sky Blue 3 Grads		£93.00
Stripe Set - Cyan, Pink and Yellow Stripes		£93.00
Selective Star Set - 8Pt Star Segment, 6pt Star Grad and 4pt Star Spot		£93.00
Net Set -Black Net 1, Black Net 2, and White Net		£66.00

LEE Resin Sunset Graduated Filters
Sunset 1 Grad - Multi coloured with graduated red orange and yellow.		£53.00
Sunset 2 Grad - Red yellow and orange grad		£53.00
Sunset 3 Grad - Red yellow and orange grad		£53.00
Sunset Red Grad - Red grad		£43.00
Sunset Orange Grad - Orange grad		£43.00
Sunset Yellow Grad - Yellow grad		£43.00

LEE Resin Sky Blue & Real Blue Graduated Filters - available in Hard or Soft Graduation
Sky Blue 1 Grad - A greenish blue to add realistic colour to flat skies.		£43.00
Sky Blue 2 Grad - A greenish blue to add realistic colour to flat skies.		£43.00
Sky Blue 3 Grad - A greenish blue to add realistic colour to flat skies.		£43.00
Sky Blue 4 Grad - A greenish blue to add realistic colour to flat skies.		£43.00
Sky Blue 5 Grad - A greenish blue to add realistic colour to flat skies.		£43.00
Real Blue 1 Grad - Darker and blacker than Sky Blue, gives a deeper effect to skies.		£43.00
Real Blue 2 Grad - Darker and blacker than Sky Blue, gives a deeper effect to skies.		£43.00
Real Blue 3 Grad - Darker and blacker than Sky Blue, gives a deeper effect to skies.		£43.00
TWILIGHT Grad - Deep blue/black gives a monochromatic twilight look. .		£53.00
POP Blue Grad -A deep reddish blue, mainly used for colour effects.		£43.00
Blue Stripe -A deep reddish blue, mainly used for colour effects.		£67.00

LEE Resin Colour Grads 100 x 150 - available in Hard or Soft Graduation & LEE Colour Resins 100x100
Straw Grad 1 , 2 & 3- A greater yellow warm-up for landscapes. Accentuates foregrounds when inverted.		£43.00
Straw Stripe		£67.00
Straw 100 x 100 1 to 3 - A greater yellow warm-up for landscapes		£43.00

Coral Grad 1 to 14- Pinkish warm-up, redder that the 81 series		£43.00
Pale Coral Stripe - Pinkish warm-up, redder that the 81 series		£67.00
Coral Stripe - Pinkish warm-up, redder that the 81 series		£67.00
Coral 100 x 100 1 to 14- Pinkish warm-up, redder that the 81 series		£43.00

Yellow Grad- Good for colour effects		£43.00
Yellow Stripe- Good for colour effects		£67.00

Chocolate Grad 1 & 2- Accentuates autumn leaves, stone etc.		£53.00
Tobacco Grad 1 -3 - Darker and redder than Chocolate or Sepia, a very strong effect		£53.00
Sepia Grad 1-3 -Gives a brown tinted monochrome look, less red than Chocolate.		£53.00
Mahogany Grad 1 -3 - Gives an evening and dawn effect to skies. A good "red sky at night" effect.		£53.00

Green Grad 1- Good for colour effects		£43.00
POP Green Grad - Good for colour effects		£43.00
Magenta Grad - Good for colour effects		£43.00
Pink 1 Grad - Good for colour effects		£43.00
Pink Stripe - Good for colour effects		£67.00

LEE Resin Filter for Black & White
No 3 Light Yellow - Partially corrects for excess blue in aerial photography-no exposure correction		£67.00
No 8 Yellow- - Darkens sky, cloud and foliage to reproduce correct tones.+ 1/3 stop		£67.00
No 11 Yellow Green- Used to alter the response of panchromatic emulsions to be equivalent to the natural response of the eye to objects under tungsten illumination. Greens are reproduced slightly lighter in daylight. + 1 1/3 stops		£67.00
No 12 Deep Yellow - Minus blue filter. Can be used to cancel blue light when infrared-sensitive films are exposed. Also penetration of haze during aerial photography.+ 1/3 stop		£67.00
No 15 Deep Yellow - Increases contrast between cloud and sky greater than No. 8, for over-correction effect. Also used for copying documents on yellowed paper.+ 2/3 stop		£67.00
No 16 Yellow Orange - Gives even greater over-correction than No. 15. Absorbs a small amount of green. + 2/3 stop		£67.00
No 21 Orange- Contrast filter. Absorbs blue and blue/green.+ 1 stop		£67.00
No 23A Light Red - Greater contrast effect than No. 21 .+ 2 stop		£67.00
No 25 Tricolour Red - Red separation - strongly absorbs blue and blue/green, even more pronounced than No.23A. Maximum transmission above 610 nanometres, used for haze penetration in aerial photography, and removing blue in infrared photography + 3 stop		£67.00

LEE Resin Colour Temperature Correction / Fluorescent / Colour Compensation
Colour Temperature Correction
80 A For colour correction when daylight film is used in tungsten lighting situations 3200-5500K Mired shift -131		£43.00
80 B - For colour correction when daylight balanced film is used in tungsten lighting situations 3400-5500K Mired shift -112		£43.00
80C - For colour correction when daylight balanced film is used in tungsten lighting situations 3800-5500K Mired shift -81		£43.00
80D - For colour correction when daylight balanced film is used in tungsten lighting situations 4200-5500K Mired shift -56		£43.00
82- For cooling down and fine colour correction when daylight film is used in tungsten lighting situations 3100-3200K Mired shift -10		£43.00
82A - For cooling down and fine colour correction when daylight film is used in tungsten lighting situations 3000-3200K Mired shift -21		£43.00
82B- For cooling down and fine colour correction when daylight film is used in tungsten lighting situations 2900-3200K Mired shift -32		£43.00
82C- For cooling down and fine colour correction when daylight film is used in tungsten lighting situations 82C - 2800-3200K Mired shift -45		£43.00
85 - For colour correction when tungsten balanced film is used in daylight situations. 5500-3400K Mired shift +112
85B- For colour correction when tungsten balanced film is used in daylight situations. 5500-3200-K Mired shift +131		£43.00
85C- For colour correction when tungsten balanced film is used in daylight situations. 5500-3800K Mired shift +81		£43.00
81 - For warming up and fine colour correction when tungsten film is used in daylight situations 3300 - 3200K Mired shift +9		£43.00
81A- For warming up and fine colour correction when tungsten film is used in daylight situations 3400-3200K Mired shift +18		£43.00
81B - For warming up and fine colour correction when tungsten film is used in daylight situations 3500-3200K Mired shift +27		£43.00
81C -For warming up and fine colour correction when tungsten film is used in daylight situations 3600-3200K Mired shift +35		£43.00
81D - For warming up and fine colour correction when tungsten film is used in daylight situations 3700-3200K Mired shift +42		£43.00
81EF - For warming up and fine colour correction when tungsten film is used in daylight situations 3850-3200K Mired shift +53		£43.00

Fluorescent Correction - Correction of Green Absorbtion and Colour Temperature		£53.00
FL5700 B - 5700K Cool White - For Tungsten film, Exposure Compensation 1 1/3 stops		£53.00
FL4300 B - 4300K White - For Tungsten film, Exposure Compensation 1 stops		£53.00
FL3600 B - 3600K Warm White - For Tungsten film, Exposure Compensation 2/3 stops		£53.00
FL5700 D - 5700K Warm White - For Daylight film, Exposure Compensation 2/3 stops		£53.00
FL4300 D - 4300K Warm White - For Daylight film, Exposure Compensation 1 stops		£53.00
FL3600 D - 3600K Warm White - For Daylight film, Exposure Compensation 1 2/3 stops		£53.00

Colour Compensation - availability 025, 05, 10, 15, 20, 25, 30, 40 or 50cc
Cyan - Principally absorbs Red		£43.00
Yellow - Principally absorbs Blue		£43.00
Magenta - Principally absorbs GReen		£43.00
Red - Principally absorbs Blue and Green		£43.00
Green - Principally absorbs Blue and Red		£43.00
Blue - Principally absorbs Red and Green		£43.00

GLASS ENHANCER This unusual filter enhances any red or orange features within an image, leaving other colours unaffected. It is particularly effective when shooting natural landscapes that may require a boost. Autumnal colours are rendered deep and rich while sunsets and any warmly coloured elements stand out from objects around them		£152.00

LEE RF 75 Series Designed to offer a compact, lightweight holder that will fit to lenses with a diameter of 67mm or less. The holder is primarily offered to users of rangefinder and high end digital compact cameras, but will equally be of use for large and medium format users who require a smaller, more compact filter system without obstruction of viewfinders. The holder has been designed to work on the widest angle lenses currently available with at least one filter slot and a polariser, and in most cases will cover lenses with two filter slots. The holder is attached to diferent size lenses via Adaptor Rings which are sold separately. The RF 75 Series take LEE 75 x 90mm filters specially made for the RF series.		Brochure Download
Filter Holder RF75	£82.00
Adapter Rings RF 75 Series -screws on the lens in order to take a filter holder 39, 40.5, 43, 46, 49, 52, 55, 58, 60, 62, 67mm	£15.50
RF75 Clip on Polariser Snaps onto the front of the holder quick and easily and rotates independently of any graduated filters being used in the holder.	£172.00
RF75 Deluxe Set - consists of a RF75 Filter Holder, RF75 Clip-on Polariser and three RF75 neutral density hard (very hard) graduated filters (0.3ND, 0.6ND & 0.9ND), all you need to add is the appropriate adaptor rings to suit your lenses.	£360.00
RF 75 FILTER SETS
RF75 Neutral Density Hard Graduated Filter Set Set contains: 1 x RF75 0.3 Neutral Density Hard Grad Filter (1 stop) 1 x RF75 0.6 Neutral Density Hard Grad Filter (2 stops) 1 x RF75 0.3 Neutral Density Hard Grad Filter (3 stops)	£129.00
RF75 Neutral Density Soft Graduated Filter Set Set contains: 1 x RF75 0.3 Neutral Density Soft Grad Filter (1 stop) 1 x RF75 0.6 Neutral Density Soft Grad Filter (2 stops) 1 x RF75 0.3 Neutral Density Soft Grad Filter (3 stops)	£129.00
RF75 Basic Filter Set 1 x RF75 0.6 Neutral Density Hard Grad Filter (2 stops) 1 x RF75 0.6 Neutral Density Standard Filter (2 stops) 1 x RF75 81B Hard Graduated Filter	£118.00
RF75 Advanced Filter Set 1 x RF75 0.9 Neutral Density Standard Filter (3 stops) 1 x RF75 0.6 Neutral Density to 81B Combination Filter 1 x RF75 81B Standard Filter	£135.00
RF75 Digital Basic Set 1 x RF75 0.6 Neutral Density Hard Grad Filter (2 stops) 1 x RF75 ProGlass 0.6 Neutral Density Standard Filter (2 stops) 1 x RF75 81B Hard Grad Filter	£155.00
RF75 Digital Advanced Set 1 x RF75 ProGlass 0.9 Neutral Density Standard Filter (3 stops) 1 x RF75 0.6 Neutral Density to 81B Combination Filter 1 x RF75 81B Standard Filter	£171.00
RF75 Black & White Set 1 x RF75 No.8 Yellow Standard Filter 1 x RF75 No.11 Yellowish-Green Standard Filter 1 x RF75 No.23A Light Red Standard Filter	£129.00
RF75 Individual Neutral Density Graduated Filters Individual neutral density graduated filters, available in hard or soft in the following strengths: RF75 0.3 Neutral Density (1 stop) RF75 0.45 Neutral Density (1½ stops) RF75 0.6 Neutral Density (2 stops) RF75 0.75 Neutral Density (2½ stops) RF75 0.9 Neutral Density (3 stops)	£48.50
RF75 Individual Neutral Density Standard Filters Available in the following strengths: RF75 0.3 Neutral Density (1 stop) RF75 0.45 Neutral Density (1½ stops) RF75 0.6 Neutral Density (2 stops) RF75 0.75 Neutral Density (2½ stops) RF75 0.9 Neutral Density (3 stops)	£54.00
RF75 Individual ProGlass Neutral Density Filters These filters are glass neutral density standard filters that absorb visible, UV and IR radiation, making them ideal for digital sensors as well as giving a crisp, punchy result on film. Available in the following strengths: RF75 ProGlass 0.6 Neutral Density RF75 ProGlass 0.9 Neutral Density	£90.00
RF75 Individual Filters The entire range of Lee Resin Filters is available for the RF75 system. Please refer to the above prices. When ordering, make sure you specify which system the filters are for.

LEE SW 150 Series Designed as a SUPER WIDE single slot system taking 150mmx150mm standard resins or 150x170mm Grads. It has been designed to initially fit the Nikon 14-24mm lens, but will also be adapted to fit on other super wide lenses. The SW150 attaches to the lens via a purpose built collar. Each lens will have a collar attachment specifically designed to work on that lens. Custom fittings based around standard LEE adaptors ring sizes will also be a future part of the System enabling the SW150 to be used with other lenses. ( NB - No Polariser or Big Stopper are planned for this system)		Information Download
Lee Filters SW150 Filter Holder Kit Includes: Holder, collar, 0.6ND (2 Stop) Grad Hard 150x170mm Filter and neoprene lens cap	£270.00
Lee Filters SW150 System Adaptor Also available is the SW150 System Adaptor, this allows you to attach to the SW150 onto any standard LEE adaptor ring, enabling you to use the SW150 on any other lenses.	£40.00
Lee Filters SW150 0.6ND Grad - Soft Filter - 0.6/2 stop ND Grad with SOFT transition 150x 170mm	£77.00
Lee Filters SW150 0.9ND Grad - Hard Filter 0.9/3 stop ND Grad with HARD transition 150x 170mm	£77.00
Lee Filters SW150 0.9ND Grad - SOFT Filter 0.9/3 stop ND Grad with HARD transition 150x 170mm	£77.00
Lee Filters SW150 0.6ND Resin Filter 0.9/3 stop ND resin filter 150 x 150mm	£85.00
Lee Filters SW150 0.9ND Resin Filter 0.9/3 stop ND resin filter 150 x 150mm	£85.00
Lee Filters SW150 0.3ND Grad - Soft Filter NOT IN STOCK 0.3/1 stop ND Grad with SOFT transition 150x 170mm	£77.00
Lee Filters SW150 0.3ND Grad - Hard Filter NOT IN STOCK 0.3/1 stop ND Grad with HARD transition 150x 170mm	£77.00
Lee Filters SW150 0.3ND Resin Filter NOT IN STOCK 0.3/1 stop ND resin filter 150 x 150mm	£85.00